pumping PULPS


In the mining industry, water is equivalent to money. Irrigating seals and diluting thick sludge its usually expensive, because the water used must be treated before and after the process. Peristaltic Albin Pumps have no seals to irrigate having the ability to pump thick pulps with 70% solids concentrations. The savings on centrifugal pumps are wide and this is just one of the benefits we offer since energy savings are also astonishing.
Handling abrasive and corrosive fluids, such as sludge and ore pulps typically used in mining operations, presents a challenge for any pump manufacturer. The high solids content and high concentration of acids are sufficiently defied in diaphragm pumps, centrifuges, and other pumps where the fluid is put in direct contact with the pump parts.
We pump all types of high- or low-grade pulp, including pyrites, copper, zinc, uranium, nickel, cobalt, silver, platinum, copper concentrates and relays, lead, zinc, etc. Also lime, sintered pulp or relave pulp or for filling in pasta with concentrations of up to 70%.
Slurry pulp Albin Pump ALH model has the ability to easily pump abrasive fluids such as sludge, relave pulps, and low- and high-law concentrates in the area of thickening tanks and filter press or filter band. Due to the high solids content in these applications, conventional pumps may fail, as the product is put into direct contact with metal parts, such as rotors, stators, impellers, steppes, and mechanical seals. In the ALBIN peristaltic pump, the hose does not fail due to abrasion.
Reduce your operating and maintenance costs by replacing your faulty centrifugal slurry transfer pumps with ALBIN peristaltic pumps.
Benefits of Albin Pump Peristaltic Pumps:
- Significant reduction in water consumption
- Reduction of up to 90% of electrical energy
- Handling of the order of 70% solids
- No flow reduction due to abrasion or pressure changes
- Preventive and fast maintenance in the field between one to three times per year (few spare parts to store)
- Robust construction, designed to handle difficult fluids: acidic, caustic, abrasive, viscous, shear sensitive, gaseous and corrosive chemicals
- Flow rates from 0 to 140 m3 / h (660 GPM) and up to 15 bar (217 psi) discharge pressure
PUMPING
- Mining tailings
- Concentrate pulps
- Paper pulps
- Flocculants and coagulants
- Slurries and tank bottoms
- Settler underflow
- Industrial sludge
- Domestic effluents
- High viscosity fluids
- Food pulps
- Mining tailings
- Concentrate pulps
- Paper pulps
- Flocculants and coagulants
- Slurries and tank bottoms
- Settler underflow
- Industrial sludge
- Domestic effluents
- High viscosity fluids
- Food pulps
Practical Examples


Peristaltic Pump UNDERFLOW Thickener - Cia. Minera Toma la Mano.
Many pumping technologies had been tested for years and none had been successful until an ALH 65 Peristaltic Pump was supplied to the Cia. Minera Toma La Mano (U.O. Cormitoma), to be installed for the pumping of the UnderFlow of the Lead Thickener. Located in Huaraz at 3,500 m.s.n.m.


Molybdenum pulp pumping - Minera Las Bambas
Supply and installation of two peristaltic Albin Pumps (one in standby) for pumping molybdenum concentrate pulp to 60% solids in Minera Las Bambas at 4600 meters above sea level. The system also features pulse dampers that linearize the discharge flow of the volumetric pump.


AlH100 peristaltic pump installation for filter press feed - Andimetal
Supply of engineering, equipment, installation, commissioning and start-up of Albin peristaltic pump for pumping cyanide pulp to filter press, equipped with rupture detector and panel with variator. Installed at 2500 meters above sea level and in a corrosive environment.
Contact a specialist


Raul Chacaltana
Commercial manager
+51 996 800 977
[email protected]




central
GENERAL RECEPTION
+51 631 6868
[email protected]
Related products
AFFETTI Centrifugal Mechanical Seal Pumps
Affetti pumps are designed to withstand heavy-duty work in any corrosive environment. Concentrated acids and bases, alkaline or slightly acidic solutions, seawater, and solvents are some of the most frequently pumped liquids.
Centrifugal Magnetic Coupled Pumps
These centrifugal pumps are the ideal choice for highly corrosive liquids that do not have solid contents. Maintenance costs are kept to a minimum.
IWAKI AIR pneumatic pumps
Iwaki Air pneumatic pumps are built for maximum performance. They are portable, easy to install, operate and maintain. They offer total regulation of flow and discharge pressure.
OBL dosing pumps
Founded in Italy in 1975, OBL is a world leader in mechanically operated dosing pumps. It presents us with dosing solutions for industrial water treatment applications and for Oil & Gas.
Peristaltic Albin Pumps
Peristaltic Albin pumps are world leaders in the peristaltic pump market They have a simple and low-cost operating and maintenance principle.
STANDARD PUMP Portable Tube Pumps
Standard Pump brand tube-type shipping pumps ensure safety for handling chemicals. These pumps feature accessories and flow and batch measurement systems.
Walchem controllers and sensors
Today, the industry has undergone changes that demand highly versatile solutions ready to correct fluctuating operations, together with simple handling and compact design.
WALCHEM dosing pumps
WALCHEM has over 50 years of experience and a commitment for superior design, which has led to the development of products with unique and innovative features on the market such as the E Series and IX Series.
News
The CAP System – Automatic Purge Control for Boilers
In the vast majority of industries, various processes can be found that require heat transfer and the most efficient way to do this is through water vapor, which is produced by Boilers (Water-tube or Fire-tube Type) or steam generators.
Walchem seminar 2019
The 7th International Seminar for Latin American WALCHEM/IWAKI AMERICA distributors was held. From September 25 to 27, 2019 in Miami – Florida (USA).
New strategic partner TFT Fluids
The important world brand TFT FLUIDS becomes our new strategic ally in microfiltration, ultrafiltration, and nanofiltration processes. It will allow Dynaflux to offer innovative solutions in the main industries such as mining, water treatments, foods, oils, chemicals, pharmaceuticals, among others.
Launch of the new M1500 BLACK Line OBL
The new M1500 Dosing Pump was launched in September 2020, offering flow rates up to 1500 LPH and pressures of 5 Bar. It has a long-lasting preformed diaphragm and is compatible with the Pro series electronic control unit.
Dynaflux 23rd Anniversary
Dynaflux celebrates 23 years of supplying chemical dosing and handling solutions for the mining and industrial markets. We also continue to improve to adapt to the new needs of the Industry. Therefore, we want to take the opportunity to publicize our most important achievements:
Dosing Skids
Supply, installation, and commissioning of dosing skids for corrosion inhibitors in UDPI, UDPII, and UDVI areas. Skid was designed and manufactured for the automatic dosing of corrosion inhibitors from SUEZ WATER TECHNOLOGIES. Used for oil refining in the areas of Primary Distillation Unit I, Primary Distillation Unit II, and Vacuum Distillation Unit I.